GRASS VALLEY Ignite SDC Series Instruction Manual page 104

Appendix C — HD Camera Block
104
2. Finely adjust the synchronizing signal input and video signal output
phases by H PHASE-FINE.
When using SD synchronizing signals:
1. Roughly adjust the synchronizing signal input and video signal output
phases by SDHD PHASE-CRS (coarse).
2. Finely adjust the synchronizing signal input and video signal output
phases by SD-HD PHASE-FINE. If the adjustment performed using
SD-HD PHASE is not satisfactory, use H PHASE-COARSE/FINE.
Ignite SDC/HDC Robotic Camera Instruction Manual