Robotic Pan/Tilt Head; Camera/Lens Assembly - GRASS VALLEY Ignite SDC Series Instruction Manual

SHOT
DIRECTOR
SHOT SUBNET
DIRECTOR HUB
IP CONTROL

Robotic Pan/Tilt Head

Camera/Lens Assembly

Ignite SDC/HDC Robotic Camera Instruction Manual
Figure 13. Interconnect (without Iignite System) Diagram
SDC/HDC ROBOTIC CAMERA
PAN/TILT
HEAD
IP CONTROL
48 VDC PWR
SUPPLY
FACILITY PROVIDED
EQUIPMENT
VIDEO
AUX
VIDEO
SWITCH
OUT
VIDEO
VIDEO
TALLY
RED (PROGRAM) TALLY
CTRLR
PROG
TALLY COMMON
COM
AMBER (PREVIEW) TALLY
PREV
SCRIPT
VIEWER
VGA
OUT
WARNING Ensure mains power is OFF before connecting or disconnecting any
cables, cords, or wires.
1. Connect a CAT-5 cable (not supplied) between the pan/tilt head
assembly and the subnet hub.
2. Connect the zoom/focus cable hirose circular connector to the lens
assembly and the DB-9 connector to the pan/tilt head.
1. Connect the camera control and power harness from the camera block
to the pan/tilt head (DB15).
RED TALLY OPTICAL SENSOR
CAMERA
BLOCK
CAM
CTRL/PWR
ZOOM/FOCUS
VIDEO
MONITOR
GEN-LOCK
(FACILITY
PROVIDED)
System Interconnection
PROMPTER
LENS
IRIS
ZOOM/FOCUS
31