Preface; About This Manual; Standard Documentation; Other Documentation - GRASS VALLEY Ignite SDC Series Instruction Manual

Preface

About This Manual

Standard Documentation

Other Documentation

Ignite SDC/HDC Robotic Camera Instruction Manual
This manual is for technical personnel responsible for installation, setup,
and operation of an Ignite SDC/HDC robotic camera.
This manual is for camera models SDC-3100P/-3110P/-3100N/-3110N and
HDC-3200/-3210/-3300/-3310.
The standard Ignite SDC/HDC robotic camera documentation set com-
prises:
• SDC/HDC Robotic Camera Instruction Manual
• JSC-2300 SHOT Director™ Robotics/Camera Controller Instruction
Manual
The flexible design of the Ignite SDC/HDC robotic camera allows opera-
tion in stand-alone manual control (ProAV) environments, or as an inte-
grated component of a fully automated Ignite Live Production Control
System. This manual provides information to install and operate the
camera in either environment. For specific details about Ignite systems,
refer to the Ignite Live Production Control System documentation listed
below:
• Installation Planning Guide
• Installation and Service Manual
• User Manual
• Release Notes
Note The Ignite Live Production Control System documentation describes periph-
eral components as they relate to the Ignite system. For any other peripheral
component information, refer to the respective support documentation.
9