Table of Contents
Advertisement
Ignite SDC/HDC Robotic Camera Instruction Manual
Note
The HDC camera accepts SD and HD synchronizing signals. HD synchro-
nizing signals may require different test equipment and may display differ-
ently than signals shown in
•
Using a two-channel oscilloscope, observe the gen-lock input
and camera video output waveforms.
•
Match the horizontal phases of the gen-lock in and video out
signals
(Figure
the GEN-LOCK or G/L menu.
Figure 15. Gen-Lock Horizontal Phase Adjustment Waveform
Horizontal phase
3. Adjust the lighting for the object.
4. Start shooting.
• Refer to the Ignite Live Production Control System User Manual for
automated camera control procedures.
• Refer to the JSC-2300 SHOT Director Robotics/Camera Controller
Instruction Manual if you want to:
•
Control the camera manually
•
Create and save presets
•
Change camera settings
5. After shooting, turn off all equipment power.
Figure
15.
15), by adjusting the camera H-Phase setting of
Gen-lock signal
Video signal
Operating Procedure
35
Advertisement
Table of Contents
