GRASS VALLEY Ignite SDC Series Instruction Manual page 95

Ignite SDC/HDC Robotic Camera Instruction Manual
Table 46. MODE Menu Selections
Selection
FORMAT
[720/60p, 59.94p, 50p, 1080/
60i, 59.94i, 50i, 1080/30p,
29.97p, 25p, 24p, 23.98p]
STATUS [OFF, ON]
MENU ON BAR [OFF, ON]
MENU SEL [VIDEO MENU, FILM
MENU]
FAN [OFF, AUTO, ON]
Description
For selecting the video output format. The format is switched when the
ENTER operation is performed.
For turning the AWB/ABB operation displays ON or OFF. The status dis-
plays are as follows.
AWB OK
AWB ACTIVE:
While automatic white balance is being executed.
AWB OK:
When the automatic white balance has been adjusted satisfactorily.
OUT RANGE RB:
When the automatic white balance has not been adjusted satisfactorily.
("RB" denotes the colors which were not balanced properly.)
HIGH LIGHT NG:
When the lighting is too high.
LOW LIGHT NG:
When the lighting is too low.
ABB ACTIVE:
While automatic black balance is being executed.
IRIS CONTROL NG:
When the lens is open.
ABB OK:
When the automatic black balance has been adjusted satisfactorily.
OUT RANGE RGB:
When the automatic black balance has not been adjusted satisfactorily.
("RGB" denotes the colors which were not balanced properly.)
For selecting whether the menu is to be displayed with the color bars.
Switching from ON to OFF or vice versa is not possible when color bars
have been set.
For selecting the menu display.
For selecting the operation mode of the air-cooled fan.
OFF: The fan is always off.
AUTO: The fan is automatically controlled by the temperature sensor.
ON: The fan is running at all times.
At the FAN OFF setting, ensure that the product is operated in an ambient
temperature below 86°F (30°C).
Menu Selections
95