Table of Contents
Advertisement
Chapter 5 - Operating instructions
5.2 System Menu
The camera is operated via the viewfinder text display and the control system menu switches.
The systems menu is viewed in the viewfinder and navigated by means of the Rotary control
and the Select button which are both located at the front of the camera.
Figure 5-1. Menu control buttons
VTR start
Audio Level
The functions of the camera are grouped into menus and sub-menus. There are seven different
menus that are listed in the main menu as follows:
Viewfinder (VF) menu
Lens menu
Video menu
Install menu
Files menu
Security menu
Diagnostics menu
Service menu
Each of these menus gives you access to a particular group of functions. Spend some time
using the controls and menus to discover the various functions. You will quickly learn to
operate the camera intuitively.
☞
Note
Some of the menu items may not appear if the user level is not set to 3.
5.2.1 Entering the System menu
Press the Select button after the camera is switched on, the message Menu off appears in the
viewfinder. Press the Select button again while this text is showing, the MAIN menu appears in
the viewfinder.
36
V
Exp.
White
Clean
shift
Time
Bal.
scan
Select
Menu
select button
>>
>>
>>
>>
>>
>>
>>
>>
Menu rotary
control
LDK 8300 HDTV High-speed camera system User's Guide (v1.0)
Advertisement
Table of Contents
