General Information; About These Instructions; Copyright; Subject To Change - Wilo Control EC-L1 Series Installation And Operating Instructions Manual

Table of Contents

Advertisement

en
1

General information

1.1

About these instructions

1.2

Copyright

1.3

Subject to change

1.4
Exclusion from warranty and liabil-
ity
2

Safety

2.1
Identification of safety
instructions
4
These instructions form part of the product. Compliance with the instructions is essential
for correct handling and use:
Read the instructions carefully before all activities.
Keep the instructions in an accessible place at all times.
Observe all product specifications.
Observe the markings on the product.
The language of the original operating instructions is German. All other languages of these
instructions are translations of the original operating instructions.
WILO SE © 2022
The reproduction, distribution and utilization of this document as well as the communica-
tion of its contents to others without express authorization is prohibited. Offenders will be
held liable for the payment of damages. All rights reserved.
Wilo shall reserve the right to change the listed data without notice and shall not be liable
for technical inaccuracies and/or omissions. The illustrations used may differ from the ori-
ginal and are intended as an example representation of the device.
Wilo shall specifically not assume any warranty or liability in the following cases:
Inadequate configuration due to inadequate or incorrect instructions by the operator or
the client
Non-compliance with these instructions
Improper use
Incorrect storage or transport
Incorrect installation or dismantling
Insufficient maintenance
Unauthorised repairs
Inadequate construction site
Chemical, electrical or electrochemical influences
Wear
This chapter contains basic information for the individual phases
of the life cycle. Failure to observe this information carries the
following risks:
Risk of personal injury from electrical, electromagnetic or
mechanical influences
Environmental damage from discharge of hazardous sub-
stances
Damage to property
Failure of important functions
Failure to observe the information contained herein will result in
the loss of claims for damages.
The instructions and safety instructions in the other chapters
must also be observed!
These installation and operating instructions set out safety in-
structions for preventing personal injury and damage to property,
which are displayed in different ways:
Safety instructions relating to personal injury start with a signal
word and are preceded by a corresponding symbol.
Installation and operating instructions • Wilo-Control EC-L • Ed.04/2022-09

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Control EC-L1 Series and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Control ec-l2 seriesControl ec-l3 seriesControl ec-l

Table of Contents