Logbook; Reading The Logbook On The Alarm Dialler - Adesys Octalarm-IP User Manual

Adesys B.V. | Wateringen

13. Logbook

The Octalarm-IP has a comprehensive logbook. All events are recorded in this with their
time and date. There are 4 ways to read the logbook:
•
on the alarm dialler itself;
•
with a PC or laptop connected to the alarm dialler, using IP-prog;
•
with a PC or laptop via a local company network / web browser (with IP address alarm
dialler).
13.1

Reading the logbook on the alarm dialler

Press the Info key on the control panel and select the LOGBOEK function key (below
right)
You will now see the last message. You can navigate through the logbook
messages with the cursor keys < and >. These move you forwards or backwards in
time by one event at a time. Depending on the last navigation direction that was
chosen, you can go forward or backward a day at a time by using the central DAY
function key.
Pressing the OPTIONS function key will display a menu:
GO TO THE BEGINNING
GO TH THE END
SHOW ALARMS (1)
SHOW ALARM PROCEDURE (2)
SHOW ALL DETAILS (3)
The first two options will take you to the beginning or end of the logbook messages
quickly. The last three options are for three levels of detail. Finish your selection with
SELECT.
The BACK function key is used to exit the logbook.
01 Shortcuts
The keys on the Octalarm-IP's numerical keyboard function as shortcuts while consulting
the logbook:
1 – select detail level 1 (alarms);
2 – select detail level 2 (alarms and procedures);
3 – select detail level 3 (all information with relating to the alarms);
Page 54 | Back to contents User manual Octalarm-IP | version 11-2021
01