Step 2: Enter Alarm Receivers In The Telephone Book - Adesys Octalarm-IP User Manual

6.3

Step 2: enter alarm receivers in the Telephone book

Menu choice 03.Telephone book
All users / recipients to be called are set in the telephone book. Linking users / receivers
to an input can only be done by first going through the menus Telephone book - Call list -
Action list.
(See QuickStart on next page).
1 First choose a user/alarm receiver from the list or use the F3 Options function key to
make a new one or remove an old one.
2 By allocating a 'role' the receiver will be given specific authorisation. There are 4
possible 4 roles: :
only reset – for users that are only authorised for alarm procedures and can never
•
change settings. They can only reset active alarms and turn off inputs when service is
required.;
assistant administrator – as above plus small changes to the alarm sequence. This is
•
sufficient for putting other people on the roster in the event of illness or holidays for
example;
administrator – as above plus complete adjusting of the alarms including adding or
•
removing people, altering call back/repeat times etc.;
Important: also able to change peoples' 'roles'.
installer – as above plus all detailed settings that are required for the installation.
•
Most installation dependent settings are made once and never changed again. An
input is, for example, "Normally open" (NO) and then always remains so.
3 The reason for the "none" option in this menu is that it's not necessary for the installer
to receive messages when they still have to be included in the Telephone Book for
example.
User manual Octalarm-IP | version 11-2021
Adesys B.V. | Wateringen
Back to contents | Page 23