Table of Contents
Advertisement
6.4
Step 3: compiling a Call list
Menu choice 04.Call lists
In the call list, the users / recipients of an alarm message are grouped. The call list also
sets the priority of the call list, dialling order of users / recipients and redial delay (if no
acceptance) of the call list.
name
1
priority
report to
2 + 3 + 4
repeat if not accepted
Repeat delay
1
First choose a Call list from the list or use the F3 Options function key to make a new Call
list or to remove one.
2
Use the F3 Options function key to add or remove receivers from the Telephone book.
3
The alarm dialler has the standard option -- All numbers – for use when compiling a Call
List. The alarm dialler uses all the receivers that are present in the memory for reporting
any alarms. This is to ensure that alarms are always answered somewhere even if the
alarm dialler has only been partly programmed.
To imitate this the alarm dialler is also programmed with a Standard Action List and a
Standard Call List that uses this option. So with a new alarm dialler that has come directly
from the supplier, it is theoretically sufficient to enter one or more telephone numbers
User manual Octalarm-IP | version 11-2021
very high
high
average
low
Very low
options (F3)
none
1 minute
2 minutes
5 minutes
10 minutes
Adesys B.V. | Wateringen
add
delete
next
times
Back to contents | Page 25
Advertisement
Table of Contents
Need help?
Do you have a question about the Octalarm-IP and is the answer not in the manual?