5.4
QuickStart mode for fast and easy set up
After logging in to the alarm there is the option of QuickStart or Complete. QuickStart
directs you to a simplified set up procedure where the manufacturer's settings are used
for the menus that aren't displayed. In such situations you will only see the following
menus:
01.ACC
02.General
03.Telephone book
06.Inputs
99. Returning to
manufacturer's settings
Only setting up these menus creates an alarm system in which all inputs are linked to a
standard action list and a standard call list.
All inputs
In the event of an alarm, the standard Action list leads to the following actions:
start the buzzer of the Octalarm-IP;
•
•
turn on the external buzzer and flashing light;
start the standard call list without delay.
•
The standard Call list results in the following call actions:
calls the first person in the telephone book two times maximum and waits for reset;
•
goes to idle after rest with automatic repetition after 1 hour;
•
•
if there is no reset, it calls the second person two times maximum;
User manual Octalarm-IP | version 11-2021
The Adésys Control Centre (ACC) has been disabled since
1 July 2021.
This is where settings relating to language and time are
entered (see paragraph 6.2 Step 1: Setting language,
location name, date and time ). In this menu you can also
turn off the use of pin codes.
This is where the telephone numbers for Installers,
Administrators, Assistant Administrators and Service
Personnel who have to deal with alarm reports are
entered, Only reset. (see paragraph 6.3 Step 2: enter alarm
receivers in the Telephone book )
This is where inputs are configured, including settings
such as open in idle (NO) or closed in idle (NC) and/or the
contacts are connected directly or via Sensorbus (see
paragraph 6.6 Step 5: configuring inputs).
The alarm can also be reset to the manufacturer's settings
in QuickStart mode (see paragraph 5.3 The convenience of
manufacturer's settings).
Action list
Call list
All telephone
numbers
Adesys B.V. | Wateringen
Back to contents | Page 19
Need help?
Do you have a question about the Octalarm-IP and is the answer not in the manual?