Switching Outputs With Voice Response; Switching Outputs With Sms (Only With Gsm Model); Reset By Means Of The Reset Button On The Front Panel Of The Octalarm-Ip - Adesys Octalarm-IP User Manual

8.5

Switching outputs with voice response

Outputs on the Octalarm-IP can be set up for remote switching. This makes it possible to
give the Octalarm-IP switch commands remotely with a (GSM-)telephone. Because of this
it is possible to carry out a reset on the monitored technical installation for example.
The instructions will be given by a voice response system as soon as an incoming call is
received. Remote switching on the outputs is protected. The voice response system will
ask for the operator's code from the Telephone Book.
Switching can be monostable (pulse switching) or bistable (alternately turning on and off).
8.6

Switching outputs with SMS (only with GSM model)

When an output is set up to be remotely switchable it can be switched by sending an SMS
with the "output name" that has already been set. With a bistable output the "on" or "off"
text also has to be sent. An output called "boiler" with the text "on" next to on, will be
switched by an SMS that says "boiler on".
8.7

Reset by means of the reset button on the front panel of the Octalarm-IP

When an alarm is active, you can press the reset button on the front panel to accept the
alarm. Note: You accept all active alarms by pressing and repeat is switched off
automatically. At the respective input number (s), the LED light remains red as long as
there is still a fault. You have one or more active alarms.
User manual Octalarm-IP | version 11-2021
Adesys B.V. | Wateringen
Back to contents | Page 39