Connecting Ethernet (Utp) And/Or Internet; Positioning The Optional Gsm Module - Adesys Octalarm-IP User Manual

Adesys B.V. | Wateringen
Avoid connecting the Octalarm-IP via a
telephone switchboard. If there is a
mains failure the appliance's
connections to a telephone switchboard
often won't work any more, making the
Octalarm-IP unable to send reports via
the telephone!
(See image for connection method when
the Octalarm-IP is to be connected in
combination with a telephone exchange.)
NB: if the Octalarm-IP is installed via a
telephone switchboard, it is important
that the telephone switchboard has an emergency power supply that is monitored
by the Octalarm-IP. This is available from Adésys.

11.6.2 Connecting ethernet (UTP) and/or internet

Connect the Octalarm-IP to an ethernet wall socket using a cable with RJ-45 connectors or
to a router. The alarm dialler will then wait until it is assigned an IP address by the DHCP
server. You can read the IP address that has been assigned in the Info screen that
appears when the Info button is pressed. You will need this IP address when you want to
program the alarm dialler from your computer via the web browser.

11.6.3 Positioning the optional GSM module

(Only applicable for Octalarm-IP type IP-A0xPE).
The dialler can only be extended by the Adésys service department with a GSM module.
They then immediately provide the dialler with the associated software. You can order
the required module from the Sales department and send the dialler to Adésys for
service.
Page 50 | Back to contents User manual Octalarm-IP | version 11-2021