Set-Up Process With The Configuration Tool; Prerequisites; Intesis Maps: Configuration And Monitoring Tool; Introduction - HMS Networks Intesis IN701-KNX Series User Manual

Set-up Process with the Configuration Tool

16. Set-up Process with the Configuration Tool

16.1. Prerequisites

For this integration, you need:
• The items delivered by HMS Networks:
– The Intesis IN701KNXxxxO000 protocol translator gateway.
– A mini-type B USB to USB cable.
– Link to download the configuration tool.
– Product documentation.
• An operative KNX installation or device well connected to the KNX port A of the Intesis gateway.
• The respective client or server devices connected to either the EIA-485/EIA-232 Port B or to the Ethernet port.

16.2. Intesis MAPS: Configuration and Monitoring Tool

16.2.1. Introduction

To configure the gateway, you need a PC running Intesis MAPS. You can download this configuration tool from
https://www.intesis.com/products/intesis-maps.
Intesis MAPS is a Windows® compatible software explicitly developed to monitor and configure Intesis gateways.
NOTE
The following sections provide some primary and general information to configure this gateway.
Although Intesis MAPS is an easy-to-manage user-friendly tool, you may need more specific and
comprehensive information about the different parameters and how to configure them. If so, please
refer to these specific Intesis MAPS user manuals depending on the protocol you are working with:
• KNX
• BACnet
• Modbus
NOTICE
The Intesis MAPS user manual referring to ASCII protocol will come soon.
USER MANUAL Version 1.0
IN701-KNX Series
Page 39 of 44