HMS Networks Intesis IN701-KNX Series User Manual page 24

IN701-KNX Series
These are the possible BACnet objects supported by the Intesis gateway:
Object Type Property
Analog Input Present Value
Analog Output Present Value
Analog Value Present Value
Binary Input Present Value
Binary Output Present Value
Binary Value Present Value
Multistate Present Value
Input
Multistate Present Value
Output
Multistate Present Value
Value
Accumulator Present Value
Loop Present Value
Every signal is identified with its associated Device + Object Type + Object Instance.
IMPORTANT
Though BACnet IP and BACnet MSTP physical layers are supported, only one physical layer can be
used at a time, i.e., if communicating to BACnet using BACnet IP, BACnet MSTP cannot be used, and
vice versa.
NOTE
Using the configuration tool, it's possible to scan the BACnet network for available devices and
their objects, which can later be directly added to your configuration. This feature facilitates the
configuration process, avoiding entering them manually.
Page 20 of 44
Description
Analog signal, for example, Ambient temperature
Analog signal
Analog signal, for example, Temperature set point
value
Digital signal, for example, ON/OFF status
Digital signal, for example, ON/OFF command
Digital signal, for example, ON/OFF status/
command
Multistate signal, for example, Working mode
status
Multistate signal
Multistate signal, for example, Working mode
command
Description
USER MANUAL Version 1.0