Technical Specifications - HMS Networks Intesis IN701-KNX Series User Manual

Technical Specifications

17. Technical Specifications
Enclosure Plastic, type PC (UL 94 V-0) / Color: light grey. RAL 7035
Mounting DIN rail EN60715 TH35
Terminal blocks Solid wires or stranded wires (twisted or with ferrule) are allowed. Per terminal:
wiring
One core: 0.5 .. 2.5mm2 / Two cores: 0.5 .. 1.5mm2 / Three cores: not allowed
Power 1 x plug-in screw terminal block (3 poles)
9 to 36VDC, 1.7W
24VAC +/- 10% 50-60Hz, 1.7W
Recommended: 24 VDC
Ethernet 1 x Ethernet RJ45 10/100BASE-T
Port A 1 x KNX orange plug-in screw terminal block (2 poles)
2500VDC isolation from other ports / KNX power consumption: 5mA/ Voltage rating: 29VDC
1 x green plug-in screw terminal block (2 poles) (reserved for future use)
SW A 1 x DIP switch for Port A configuration (reserved for future use)
Port B 1 x serial EIA-232 DB9male
Pinout from a DTE device / 1500VDC isolation from other ports (except Port B: EIA-485)
1 x serial EIA-485 green plug-in screw terminal block (3 poles)
1500VDC isolation from other ports (except Port B: EIA-232)
SW B 1 x DIP switch for serial EIA-485 configuration:
Position 1:
• ON: 120 Ω termination active
• OFF: 120 Ω termination inactive
Position 2-3
• ON: polarization active
• OFF: polarization inactive (default)
Battery Size: coin 20mm x 3.2mm / Capacity 3V - 255mAh / Type: Manganese Dioxide Lithium
Console port Mini Type-B USB 2.0 compliant / 1500VDC isolation
USB port Type-A USB 2.0 compliant / Only for USB flash storage devices (USB pen drive) / HDD connection not allowed / Power
consumption limited to 150mA
Push buttons Button A and button B: Factory reset
Operational Temperature: 0 .. +60ºC / Humidity: 5 .. 95% (no condensation)
conditions
LED indicators 10 x Onboard LED indicators:
1 x Power / 1 x Error / 2 x Ethernet / 2 x Port A / 2 x Port B / 1 x Button A / 1 x Button B
USER MANUAL Version 1.0
IN701-KNX Series
Page 43 of 44