Mounting - HMS Networks Intesis IN701-KNX Series User Manual

Mounting

14. Mounting
IMPORTANT
• Before mounting, ensure that the chosen installation place preserves the gateway from direct
solar radiation, water, high relative humidity, or dust.
• Mount the gateway over a DIN rail, preferably inside a grounded metallic industrial cabinet.
• Ensure the gateway has sufficient clearances for all connections when mounted (see
Dimensions (page
DIN rail mounting
The rear panel has a groove to fit the gateway to the DIN rail using two static tabs (top side) and a mobile clip
(bottom side).
1. Push down the mobile clip until you hear a click.
2. Fasten the gateway to the DIN rail.
3. Push up the clip again to lock the gateway to the rail.
USER MANUAL Version 1.0
44)).
IN701-KNX Series
Page 27 of 44