Control Panel; Hose Connection Dds; Prepare The Device With The Single-Patient Secretion Canister - Atmos LC 27 Operating Instructions Manual

Hide thumbs Also See for LC 27:
Table of Contents

Advertisement

3.1.4 Control panel

 The battery charge level of the ATMOS LC 27 Battery must be visually monitored by
checking the indicator.
 If only the red LED lights up, although the battery has been loaded for a longer
period, the battery is defective.

3.1.5 Hose connection DDS

Suction hose with DDS adapter and
fingertip (REF 321.0100.0)
3.2 Prepare the device with the single-patient secretion
1. After transportation of the device at low temperatures and prior to first start-up, it
should be kept at room temperature for at least six hours.
2. Take the device and the accessories out of the packaging.
3. Read the safety notes before initial start-up.
4. Check the device for any transport damage.
5. If the device is damaged: Document and report the damages in transit, see "6.2
Sending in the device" on page 41 and spare parts can be requested (see back).
20
Setting up and starting up
canister
ATMOS LC 27
On/Off button
Release button
Holder for suction hose
Connection for suction hose
Operation status display
ATMOS LC 27 Battery
On/Off button
Release button
Fastener for suction hose
Connection for suction hose
Battery charge indicator
Operation status display
DDS hose adapter (REF 321.0040.0)
 Connect the suction hose with the
DDS hose adapter.

Advertisement

Table of Contents
loading

Table of Contents