Connecting The Suction Hose With Dds Adapter And Fingertip; Connecting The Dds Hose Adaptor; Holder For Suction Hose - Atmos LC 27 Operating Instructions Manual

3.6.5 Connecting the suction hose with DDS adapter and fingertip

3.6.6 Connecting the DDS hose adaptor

3.6.7 Holder for suction hose

1. Insert the blue adapter on the suction
hose into the opening on the single-
patient secretion canister lid.
2. Turn the blue adapter clockwise with
a quarter turn.
3. Now, check that the suction hose is
connected firmly to the single-patient
secretion canister system.
 The device is ready for use.
1. Insert the single blue DDS hose
adapter into the opening on the
single-patient secretion canister lid.
2. Turn the blue DDS hose adapter
clockwise with a quarter turn.
3. Now, check that the DDS hose
adapter is connected firmly to the
single-patient secretion canister
system.
4. Next, connect the suction hose to the
blue DDS hose adapter.
5. Connect the open end of the suction
hose to a fingertip.
 The device is ready for use.
1. Clip the suction hose into the
corresponding hose holders on the
single-patient secretion canister lid.
 The suction hose has been attached in
place and is ready for use.
Setting up and starting up
25