4.5.1 Removing the single-patient secretion canister system
1. Remove the single-patient secretion canister system by pressing and holding the
2. Open the single-patient secretion canister lid by turning the lid anti-clockwise with a
3. Remove the single-patient secretion canister lid from the single-patient secretion
4. Clean the device after each use: See chapter "5.0 Cleaning and disinfection" on page
5. Perform a function check after each cleaning: See chapter "6.1 Function check" on
The device has been made ready for its next use.
»
4.5.2 Removing the suction hose with DDS adapter and fingertip
1. Turn the blue adapter on the suction hose anti-clockwise with a quarter turn.
2. Remove the blue adapter from the single-patient secretion canister lid.
You can now remove the suction hose.
4.5.3 Removing the DDS hose adaptor
1. Remove the suction hose from the blue DDS adapter.
2. Turn the blue DDS adapter anti-clockwise with a quarter turn.
3. Remove the blue DDS adapter from the single-patient secretion canister lid.
You can now remove the DDS adapter.
»
34
Operation
release button on the control panel and taking the single-patient secretion canister
system out to the side.
quarter turn.
canister.
35.
page 41.