Figure 3-51 Scan Barcode 1; Figure 3-52 Scan Remaining Barcodes - LXE VX3X Reference Manual

eXpress Scan
3. Barcode 1 must be scanned first. The scanned data is displayed in the "Data" text box. The
password, if any, entered above is compared to the password entered when the barcodes were
created.
4. If the passwords match, the barcode data is processed and the screen is updated to reflect the
number of barcodes included in the set.
The remaining barcodes may be scanned in any order. After a barcode is scanned, that
barcode is removed from the "Remaining:" list and placed in the "Scanned:" list.
5. If the passwords do not match, an error message is displayed. The current screen can be
closed using the X in the upper right corner. The password can be re-entered and Barcode 1
scanned again.
6. Once the first barcode is scanned, the remaining barcodes may be scanned in any order.
E-EQ-VX3XRG-D

Figure 3-51 Scan Barcode 1

Figure 3-52 Scan Remaining Barcodes

131
VX3X Reference Guide