Programmable Keys; Field Exit Key Function (Ibm 5250 Only); Figure 2-11 Programmable Keys - LXE VX3X Reference Manual

External Connectors

Programmable Keys

There are two keys, one on each side of the display. The keys can be programmed to perform
specific functions. The programmable keys have no effect on barcode scanners tethered to the
device. Both buttons default to disabled (with the exception of IBM 5250 terminal emulation
devices – in this case, the left button is labeled and functions as "Field Exit").
Note:
To edit the button parameters, select Start | Settings | Control Panel | KeyPad. Change the
parameter values and tap OK to save the changes.

Field Exit Key Function (IBM 5250 Only)

The Field Exit key is used to exit an input field. If the field is an Auto Enter field, the
auto transmit function is activated. This key function is present on the IBM 5250 specific
keypad only.
E-EQ-VX3XRG-D

Figure 2-11 Programmable Keys

The programmable Scan key is the Field Exit key when the VX3X is an IBM 5250
compatible device.
41
VX3X Reference Guide