Status; Figure 3-48 Status Display - LXE VX3X Reference Manual

Wavelink Avalanche Enabler Configuration
For descriptions of these Enabler parameters, refer to Chapter 5 "Wireless Network
LXE does not recommend enabling "Manage Wireless Settings" for Summit Client devices.
When you download a profile that is configured to manage network and wireless settings, the
Enabler will not apply the manage network and wireless settings to the adapter unless the global
Manage wireless settings and Manage network settings options are enabled on the Adapters
panel (see Figure titled Adapters Options – Network).
Until these options are enabled, the network and wireless settings are controlled by the third-party
software associated with these settings.

Status

The Status panel displays the current status of the mobile device network adapter selected in the
drop down box. Note the availability of the Windows standard Refresh button. When tapped, the
signal strength, signal quality and link speed are refreshed for the currently selected adapter. It
also searches for new adapters and may cause a slight delay to refresh the contents of the drop-
down menu.
Link speed indicates the speed at which the signal is being sent from the adapter to the mobile
device. Speed is dependent on signal strength.
E-EQ-VX3XRG-D
Configuration".

Figure 3-48 Status Display

129
VX3X Reference Guide