Figure 5-29 Eap-Tls Credentials - LXE VX3X Reference Manual

190
Enter the Domain\Username (if the Doman is required), otherwise enter the Username.
Leave the certificate file name entries blank for now.
Click OK then click Commit. Ensure the correct Active Profile is selected on the Main tab.
Once successfully authenticated, import the user certificate into the Windows certificate store.
Return to the Credentials screen.
Use the Browse button to locate the User Cert from the certificate store. Highlight the desired
certificate and press the Select button. The name of the certificate is displayed in the User Cert
box.
Enter the password for the user certificate in the User Cert pwd box.
Please review "Windows Certificates Store vs. Certs Path" earlier in this chapter.
Check the Validate server a checkbox.
If using the Windows certificate store:
If using the Certs Path option:
Click OK then click Commit.
The device should be authenticating the server certificate and using EAP-TLS for the user
authentication.
For information on generating a Root CA certificate, please see "Root CA Certificate" later in this
chapter. For more information on generating a User certificate, see "User Certificate" later in this
chapter.
Note:
VX3X Reference Guide

Figure 5-29 EAP-TLS Credentials

•
Check the Use MS store checkbox. The default is to use the Full Trusted Store.
•
To select an individual certificate, click on the Browse button.
•
Uncheck the Use full trusted store checkbox.
•
Select the desired certificate and click Select. You are returned to the Credentials
screen.
•
Leave the Use MS store box unchecked.
•
Enter the certificate filename in the CA Cert textbox.
The date must be properly set on the device to authenticate a certificate.
Summit Radio
E-EQ-VX3XRG-D