Mobile Device Wireless And Network Settings - LXE VX3X Reference Manual

116
After installing the Enabler on the mobile unit, a reboot is required for the Enabler to begin
normal functionality. Following a mobile device reboot, the Enabler searches for an Mobile
Device Server, first by polling all available serial ports and then over the wireless network. The
designation of the mobile device to the Avalanche Mobility Center Manager is LXE_VX3X.
The Enabler running on LXE Windows CE devices will attempt to access COM1, COM2, and
COM3. "Agent not found" will be reported if the Mobile Device Server is not located or a serial
port is not present or available (COM port settings can be verified using the LXE scanner applet
in the Control Panel).
The wireless connection is made using the default radio interface on the mobile device therefore
the device must be actively communicating with the network for this method to succeed. If a
Mobile Device Server is found, the Enabler will automatically attempt to apply all wireless and
network settings from the active profile. The Enabler will also automatically download and
process all available packages.

Mobile Device Wireless and Network Settings

Once the connection to the Mobile Device Server is established, the Enabler will attempt to apply
all network and wireless settings contained in the active profile. The success of the application of
settings is dependent upon the local configuration of control parameters for the Enabler. These
local parameters cannot be overridden from the Avalanche Mobility Center Console.
The default Enabler adapter control setting are:
To configure the Avalanche Enabler management of the network and wireless settings:
1. Open the Enabler Settings Panels by tapping the Avalanche icon on the desktop.
2. Select File | Settings. Enter the password.
3. Select the Adapters tab.
4. Choose settings for the "Use Manual Settings" parameter.
5. Choose settings for "Manage Network Settings", "Manage Wireless Settings" and "Use
Avalanche Network Profile".
6. Click the OK button to save the changes.
7. Reboot the device.
The designation of the mobile device to the Avalanche CE Manager is LXE_VXC.
See Also: "Using Wavelink Avalanche on LXE Windows Computers".
VX3X Reference Guide
•
Wired via a USB connection, using ActiveSync, between the Mobile Device Server
and the mobile device.
•
Wirelessly via the radio and an access point
•
Manage network settings – enabled
•
Use Avalanche network profile – enabled
•
Manage wireless settings – disabled for Windows CE Units
Wavelink Avalanche Enabler Configuration
E-EQ-VX3XRG-D