Diags Tab; Figure 5-7 Scu – Diags Tab - LXE VX3X Reference Manual

Summit Radio

Diags Tab

The Diags screen can be used for troubleshooting network traffic and radio connectivity issues.
E-EQ-VX3XRG-D
Figure 5-7 SCU – Diags Tab
•
(Re)connect – Use this button to apply (or reapply) the current profile and attempt
to associate or authenticate to the wireless LAN. All activity is logged in the
Diagnostic Output box on the lower part of the screen.
•
Release/Renew – Obtain a new IP address through release and renew. All activity is
logged in the Diagnostic Output box. If a fixed IP address has been assigned to the
radio, this is also noted in the Diagnostic Output box. Note that the current IP
address is displayed above this button.
•
Start Ping – Start a continuous ping to the IP address specified in the text box to the
right of this button. Once the button is clicked, the ping begins and the button label
changes to Stop Ping. Clicking the button ends the ping. The ping also ends when
any other button on this screen is clicked or the user browses away from the Diags
tab. The results of the ping are displayed in the Diagnostic Output box.
•
Diagnostics – Also attempts to (re)connect to the wireless LAN. However, this
option provides more data in the Diagnostic Output box than the (Re)connect option.
This data dump includes radio state, profile settings, global settings, and a list of
broadcast SSID APs.
•
Save To... – Use this save the results of the diagnostics to a text file. Use the
explorer window to specify the name and location for the diagnostic file. The text
file can viewed using an application such as WordPad.
165
VX3X Reference Guide