36
USB-C Connector
When present, the USB client connector (labeled "USB-C") is an industry-standard RS-232 9-pin
"D" male connector.
The optional LXE USB cable is required to adapt the connection to a standard USB connector.
Please refer to section titled "Accessories" for the USB part number when ordering.
Caution – Do Not Use the USB Labeled Endcap Port for Tethered Scanners.
USB Client Cable Pinout
5
9
ActiveSync
Connect from USB-C port to USB Type A Host – a laptop/desktop, etc.
VX3X Reference Guide
3
4
2
1
Figure 2-6 USB Client Cable Pinout
Mobile Device End
1 Host Detect
2 Not Used
3 D + (Green Wire)
4 Not Used
5 Ground (Black Wire)
6 Not Used
7 D – (White Wire)
8 Not Used
9 Not Used
Port Label on Endcap
1
VX3X Cable Connector
6
USB Client Cable Connector
Goes To
USB Type A Plug End
1
3
4
2
External Connectors
E-EQ-VX3XRG-D