Adapters; Figure 3-45 Adapter Options – Network - LXE VX3X Reference Manual

126

Adapters

Note:
Manage Network
Setting
Manage Wireless
Settings
Current Adapter
Primary Adapter
Icon on taskbar
Use Avalanche Network
Profile
VX3X Reference Guide
LXE recommends the user review the network settings configuration utilities and the
default values in Chapter 5 before setting All Adapters to Enable in the Adapters applet.
Figure 3-45 Adapter Options – Network
When enabled, the Enabler will control the network settings. This
parameter cannot be configured from the Avalanche Mobility
Center Console and is enabled by default.
When enabled, the Enabler will control the wireless settings. This
parameter cannot be configured from the Avalanche Mobility
Center Console and is disabled by default. This parameter setting
does not apply to Summit Clients only.
Lists all network adapters currently installed on the mobile device.
Indicates if the Enabler is to attempt to configure the primary
adapter (active only if there are multiple network adapters).
Places the Avalanche icon in the Avalanche taskbar that may,
optionally, override the standard Windows taskbar.
The Enabler will apply all network settings sent to it by the
Avalanche Mobility Center Console.
Wavelink Avalanche Enabler Configuration
E-EQ-VX3XRG-D