Face Capture Configuration; Overlay & Capture - HIKVISION DS-2DY9250IAX-A User Manual

5.5 Face Capture Configuration

Notes:
11. When adjusting image and video effect, you can click
to record a video clip for testing. Pictures and videos are saved in your local
computer.
12. Face capture function detects and captures faces in surveillance scenes. When the
grading of the detected face exceeds an algorithm-defined value, the PTZ camera
channel captures the face and triggers linkage actions. Set up Overlay & Capture, Rule
and Advanced Configuration before using the function.
13. For certain camera models, you need to select Face Capture on VCA Resource page first.
Configuration > System > System Settings
14. Face capture is only supported by certain camera models.
5.5.1 Overlay & Capture
Purpose:
You can choose to configure Display on Stream, Display on Picture, Snapshot Settings, Camera
Information, and Text Overlay on stream/picture.
Enter the Overlay & Capture configuration interface:
Configuration > Face Capture > Overlay & Capture
 Display on Stream: Check the checkbox, then the green frames will be displayed on the
target if in a live view or playback.

Display on Picture: Check the checkbox, then there will be a frame on the target on the
uploaded alarm picture if the checkbox is checked.
 Snapshot Settings: You can set the quality and resolution for the captured picture.

Picture Quality from the dropdown list. High, Medium, and Low are selectable.
© Hikvision
Figure 5-42 Overlay & Capture interface
to capture a image and click