Chapter 3 Accessing To The Network Speed Dome; Accessing By Web Browsers - HIKVISION DS-2DY9250IAX-A User Manual

User Manual of Network Speed Dome
Chapter 3 Accessing to the Network

3.1 Accessing by Web Browsers

Steps:
1. Open the web browser.
2. In the address field, input the IP address of the network camera, e.g., 192.168.1.64 and press
the Enter key to enter the login interface.
3. Activate the camera for the first time using. Refer to the Section 2.1.2 Activating the Camera.
4. Select English as the interface language on the top-right of login interface.
5. Input the user name and password and click
The admin user should configure the device accounts and user/operator permissions properly.
Delete the unnecessary accounts and user/operator permissions.
Note:
The device IP address gets locked if the user performs certain failed password attempts.
Admin user can adjust the number of attempts on Security Service page (Configuration >
System > Security).
6. For certain web browsers, you should install the plug-in before viewing the live video and
operating the camera. Follow the installation prompts to install the plug-in.
Note:
You may have to close the web browser to install the plug-in. Reopen the web browser and
log in again after installing the plug-in.
© Hikvision
Speed Dome
Figure 3-1 Login Interface
13
.