Table of Contents
Advertisement
Configuring Time Synchronization Manually
Steps:
1. Check the Manual Time Sync radio button.
2. Click
to set the system time from the pop-up calendar.
3. Click
Note:
You can also check the Sync with local time checkbox to synchronize the time of the camera with
the time of your computer.
Select the Time Zone
Purpose:
When the camera is taken to another time zone, you can use the Time Zone function to adjust
the time. The time will be adjusted according to the original time and the time difference
between the two time zones.
From the Time Zone dropdown menu as shown in Figure 6-48, select the Time Zone in which the
camera locates.
Configuring DST (Daylight Saving Time)
Purpose:
Daylight Saving Time (DST) is a way of making better use of the natural daylight by setting your
clock forward one hour during the summer months, and back again in the fall.
If there is the habit of adjusting clocks forward in your country in certain time period of a year,
you can turn this function on. The time will be adjusted automatically when the Daylight Saving
Time (DST) comes.
Steps:
1. Enter the DST interface by Configuration > System > System Settings > DST
© Hikvision
to save the settings.
Figure 6-47 Time Sync Manually
Figure 6-48 Time Zone Settings
Advertisement
Table of Contents
