Configuring Region Entrance Detection - HIKVISION DS-2DY9250IAX-A User Manual

Section 5.2.1 Configuring Motion Detection for more details.
8. Click
Notify Surveillance Center, Send Email, Upload to FTP/Memory Card/NAS, Trigger Alarm
Output, Trigger Recording, Smart Tracking, White Light Flashing, and Audible Warning are
selectable.

For speed dome, you can also choose to link smart tracking. Smart Tracking should be
configured in advance.

For certain models, White Light Flashing and Audible Warning are supported. Refer to
Section 5.2.1 Configuring Motion Detection for detailed configuration.
9. Click

5.3.5 Configuring Region Entrance Detection

Note:
The function varied depending on different speed domes.
Purpose:
Region entrance detection function detects people, vehicle or other objects which enter a
pre-defined virtual region from the outside place, and some certain actions can be taken when
the alarm is triggered.
Steps:
1. Enter the Region Entrance Detection settings interface:
Configuration> Event > Smart Event> Region Entrance Detection
2. Check the checkbox of Enable to enable the Region Entrance Detection function.
© Hikvision
tab to select the linkage method taken for the line crossing detection,
to save the settings.