Table of Contents
Advertisement
4. Edit a preset name by double clicking on the default name such as preset 1. (The pre-defined
presets are named already but not configurable. Refer to the user manual for detailed
function description.)
5. You can click
to delete the preset.
Note:
You can configure up to 272 presets.
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
For convenient preset selection, refer to the following steps to navigate to the preset you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
Notes:
The following presets are predefined with special commands. You can only call them but not
configure them. For instance, preset 99 is the "Start auto scan". If you call the preset 99, the
camera starts auto scan function.
Pattern function varies depending on different camera models
Preset
33
34
35
36
37
38
39
40
41
42
43
© Hikvision
Figure 4-7 Calling a Preset
Table 4-5
Special Presets
Function
Auto flip
Back to initial position
Call patrol 1
Call patrol 2
Call patrol 3
Call patrol 4
Day mode (IR cut filter
in)
Night mode (IR cut
filter out)
Call pattern 1
Call pattern 2
Call pattern 3
.
Preset
92
93
94
95
96
97
98
99
100
101
102
to call the preset.
Function
Set Manual limits
Save manual limits
Remote reboot
Call OSD menu
Stop a scan
Start random scan
Start frame scan
Start auto scan
Start tilt scan
Start panorama scan
Call patrol 5
Advertisement
Table of Contents
