HIKVISION DS-2DY9250IAX-A User Manual page 67

3. The event triggered and park action related PTZ movement will be locked for 180 seconds
after you enter the line crossing detection interface. Optionally, you can click the
when the button turns to
4. Select the region from the dropdown list for detection settings.
5. Click the
6. Click on the live video to specify the four vertexes of the detection region, and right click to
complete drawing.
Repeat the step to configure other regions. You can click the
pre-defined regions.
7. Configure the parameters for each detection region separately.
 Sensitivity: The value of the sensitivity defines the size of the object which can trigger
the alarm, when the sensitivity is high, a very small object can trigger the alarm.

Detection Target: You can select Human, Vehicle, or Other as the detection target. If
Human is selected, only human beings will be identified as detection objects and as
well as Vehicle and Other.
8. Click
schedule configuration is the same as the settings of the arming schedule for motion
detection. Refer to Section 5.2.1 Configuring Motion Detection for more details.
9. Click
Notify surveillance center, send email, upload to FTP, trigger channel, smart tracking, White
Light Flashing, Audible Warning, and trigger alarm output are selectable.

For speed dome, you can also choose to link smart tracking. Smart Tracking should be
configured in advance.
© Hikvision
Figure 5-25 Configuring Region Entrance Detection
button to manually activate the movement, or lock the movement
button to start the region drawing.
tab to enter the arming schedule setting interface. The time
tab to select the linkage method taken for the region entrance alarm,
by clicking it.
button to clear all