4. Configure the preset number, patrol time and patrol speed.
Name
Patrol Time
Patrol Speed
5. Click OK to save a preset into the patrol.
6. Repeat the steps from 3 to 5 to add more presets.
7. Click OK to save all the patrol settings.
Calling a Patrol:
In the PTZ control panel, select a defined patrol from the list and click
shown in Figure 4-10.
© Hikvision
Figure 4-9 Adding Presets
Description
It is the duration staying on one patrol point. The camera moves to
another patrol point after the patrol time.
It is the speed of moving from one preset to another.
Figure 4-10 Calling a Preset
to call the patrol, as