Table of Contents
Advertisement
44
45
46
Note:
You may need to use the OSD (On Screen Display) menu when controlling the camera
remotely. To display the OSD menu on the live view screen, you can call the preset number
95.
4.5.4 Setting/Calling a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on the patrol
settings interface. There are up to 8 patrols for customizing. A patrol can be configured with 32
presets.
Before you start:
Make sure that the presets you want to add into a patrol have been defined.
Setting a Patrol:
Steps:
1. In the PTZ control panel, click
2. Select a patrol number from the list and click
3. Click
to enter the adding interface of preset, as shown in Figure 4-9.
© Hikvision
Call pattern 4
One-touch Patrol
Day/Night Auto Mode
Figure 4-8 Special Preset
to enter the patrol settings interface.
103
104
105
.
Call patrol 6
Call patrol 7
Call patrol 8
Advertisement
Table of Contents
