To initialize, refer to the steps of NAS disk initialization
5.1.4 Configuring Cloud Storage
Steps:
1.
Enter the Cloud Storage settings interface:
Configuration > Storage > Storage Management > Cloud Storage
2.
Check the checkbox to enable this function.
3.
Select Protocol Version from dropdown list.
4.
Enter the Server IP. Server Port, User Name, Password, and Picture Storage Pool ID.
5.
Click
5.2 Basic Event Configuration
Purpose:
This section explains how to configure the network camera to respond to alarm events, including
motion detection, video tampering alarm input, alarm output and exception. These events can
trigger the alarm actions, such as Send Email, Notify Surveillance Center, etc.
For example, when motion detection is triggered, the network camera sends a notification to an
e-mail address.
On the event configuration page, click
Click the direction buttons to control the pan/tilt movements.
© Hikvision
Figure 5-9 Cloud Storage configuration
to save the settings.
to show the PTZ control panel or click
to hide it.