HIKVISION DS-2DY9250IAX-A User Manual page 89

2. Configure the NIC settings, including the IPv4(IPv6) Address, IPv4(IPv6) Subnet Mask and
IPv4(IPv6) Default Gateway.
3. Click
You can click Test to make sure that the IP address is valid.
Notes:

If the DHCP server is available, you can check
address and other network settings from that server.

The valid value range of Maximum Transmission Unit (MTU) is 1280 to 1500.

The Multicast sends a stream to the multicast group address and allows multiple clients to
acquire the stream at the same time by requesting a copy from the multicast group address.
Before utilizing this function, you have to enable the Multicast function of your router and
configure the gateway of the network camera.

If the DNS server settings are required for some applications (e.g., sending email), you
should properly configure the Preferred DNS Server and Alternate DNS server.
Note:
The router must support the route advertisement function if you select Route
Advertisement as the IPv6 mode.
© Hikvision
Figure 6-1 TCP/IP Settings
to save the above settings
Figure 6-2 DNS Server Settings
.
to automatically obtain an IP