HIKVISION DS-2DY9250IAX-A User Manual page 102

When devices connect to this network with IEEE 802.1X standard, the authentication is needed. If
the authentication fails, the devices don't connect to the network.
The protected LAN with 802.1X standard is shown in Figure 6-18
 Before connecting the Network Camera to the protected LAN, apply a digital certificate
from a Certificate Authority.
 The network camera requests access to the protected LAN via the authenticator (a
switch).
 The switch forwards the identity and password to the authentication server (RADIUS
server).

The switch forwards the certificate of authentication server to the network camera.
 If all the information is validated, the switch allows the network access to the protected
network.

For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The password
should be something of your own choosing (using a minimum of 8 characters, including
upper case letters, lower case letters, numbers and special characters) in order to increase
the security of your product.

Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Steps:
1. Connect the network camera to your PC directly with a network cable.
2. Enter the 802.1X settings interface:
Configuration > Network > Advanced Settings > 802.1X
© Hikvision
Figure 6-18 Protected LAN