Calibration - Danfoss Control C.2 Operator's Manual

8.4

Calibration

Measuring result of the ovality as the mean value of
the individually measured values. Rules:
•
Green display: the workpiece is within the per-
missible tolerance
•
Red display: the workpiece is not within the
permissible tolerance
•
Grey display: the measurements are not suffi-
cient (e.g. because only one measurement,
each, was made in the front, centre and back).
The pre-set tolerance value is indicated behind the
symbol.
Measuring result of the conicity as the mean value
of the individually measured values. Rules:
•
Green display: the workpiece is within the per-
missible tolerance
•
Red display: the workpiece is not within the
permissible tolerance
•
Grey display: the measurements are not suffi-
cient (e.g. because only one measurement,
each, was made in the front, centre and back).
The pre-set tolerance value is indicated behind the
symbol.
Back to measurement screen to repeat the meas-
urement.
Accept measurement and return to start screen.