Danfoss Control C.2 Operator's Manual page 37

Proceed to the following screens:
1.
•
•
See "Operating pressure and counter settings",
Section 4.
(Option) PFC only:
2.
See "Pre-set PID controller (PFC only)" in Section
4.
(Option) Label printer
•
•
•
See "UNIFLEX Label System" (Option) in Section
5.
Return to previous screen.
Set machine switch
For machines with this function, the crimping dies are closed at two
different speeds:
•
(rapid) Closing
•
(slow) Forming
The switch point is set by the distance (mm/inch) or the pressure
(bar/psi/MPa). The value reached by the machine first will trigger the
switch from (rapid) closing to (slow) forming.
This setting has no effect in machines without this function.
Settings
Hose operating pressure
Counter
PID controller settings.
Green display: automatic printing activated
with every second forming cycle.
Red display: automatic printing deactivated.
Activate button: The screen for the printer set-
tings is opened.