Table of Contents
Advertisement
8.
Select Storage Card USB or Refresh to search for the USB stor-
age medium again.
9.
Confirm with Next.
10. Select Backup
It will only be possible to complete an error-free backup when
Complete backup with licenses is selected.
11. Select complete backup with licenses
12. Confirm with Create.
The backup is created. This process can take some time.
13. Confirm the message Backup operation successfully completed
with OK.
14. Remove USB storage medium.
15. Restart the machine control by switching it off and on again at
the main switch.
Restore CONTROL C.2
1.
Start StartCenter (6) by a double click.
The screen "Transfer" is opened, and the transfer is started.
2.
Terminate transfer by pressing Cancel.
3.
Activate the Settings button (4).
4.
Start Service & Commissioning (1) by a double click.
5.
Connect the USB storage medium containing the backup file on
the back side of the control console.
6.
Select the Restore tab (2).
7.
Press the Next button.
8.
Select Storage Card USB
9.
Confirm with Next.
10. Select the requested backup file *.brf on the USB storage me-
dium
11. Select Restore
12. Confirm with Yes.
The restore process begins. This process can take some time.
13. Wait until the message Restore operation successfully com-
pleted appears.
Advertisement
Table of Contents
