Machine Settings - Danfoss Control C.2 Operator's Manual

7.8

Machine settings

Screen: Machine type
Preset zero point and/or reference point of ma-
chine.
Screen: Permissible range before zero point is
reached, as from where the machine may build up
force without causing damage to the bearing plates.
The dimension depends on the geometry of the tool
and cannot be changed.
Screen: Outside the permissible range, the ma-
chine may build up a maximum pressure of x bar
without causing the machine's shutdown. This va-
lue cannot be changed.
Maximum travel distance of the machine in millime-
tres.
Definition of change position for crimping dies.
Analog digital converter
Converts the position encoder length in 0 – 27648
scale marks.