Operating Pressure And Counter Settings - Danfoss Control C.2 Operator's Manual

6.3.3 Operating pressure and counter settings

Hose nominal pressure input.
It is only required to input the value, if the value in-
dicated is to be printed on a label (see "UNIFLEX
LAGEL SYSTEM ULS" in Section 5).
For recording unit quantities, for instance, two va-
cant unit counters are available. The unit counters
may be used independently. The counter reading
may be modified manually by entering a value in
the input field.
Reset counter reading to 0.
Return to previous screen.
(Option) PFC only:
PID controller settings.