Danfoss Control C.2 Operator's Manual page 26

(Option) Crimping die thickness
The symbol with the input field will only be dis-
played, if the use of special crimping dies is possi-
ble in the machine, and if the selected crimping di-
mension exceeds or is equal to the smallest
possible special criming die.
Display: current value for the diameter.
Display: current value for the forming pressure.
The tool automatically opens after the forming pro-
cess.
The tool does not automatically open after the form-
ing process.
The screen for approaching the change position for
crimping dies is opened.
Please refer to "Change crimping dies" in Section
5.
(Option) Label printer
•
Green display: automatic printing activated
with every second forming cycle.
•
Red display: automatic printing deactivated.
•
Activate button: The screen for the printer set-
tings is opened.
See "UNIFLEX Label System" (Option) in Section
5.
(Option) Industrial crimp calculator
This is only displayed, if the machine is configured
with this function and this function is activated in
the machine settings.
See "UNIFLEX Data Logging (UDL) and Industrial
Crimp Calculator (ICC)" in Section 4.
Return to previous screen.