Form To A Pressure Value (Only Pfm And Pfc) - Danfoss Control C.2 Operator's Manual

6.3.2 Form to a pressure value (only PFM and PFC)

Screen: Name of current data record.
Touching: Load data record from database.
Delete data record from input field.
Enter forming pressure to be operated by the ma-
chine.
Enter opening diameter.
The current diameter at which the machine is set is
accepted as opening diameter.
Proportional share of the PID controller(only PFC).
Regulates the oil pressure/oil flow. These settings
must only be performed by qualified personnel.