Danfoss Control C.2 Operator's Manual page 35

Pre-select the number of workpieces to be pro-
cessed.
If "0" is entered, a deliberate number of forming
processes may be performed without a deactivation
of the control.
An appropriate message is displayed as soon as
the selected number of workpieces is reached.
Screen: Number of forming processes completed
so far. Each forming process completed with the
preset forming dimension diameter is counted.
If the preset number is reached, the machine stops.
Display: current position of tool.
Display: actual position of the tool when the target
value is reached.
Note:
@ Various mechanisms in the machine act on com-
pensating the spring back of the workpiece so that
the target value is reached. The- value achieved
may therefore deviate from the target value en-
tered.
Display: current value for the forming pressure.
Display: actual forming pressure when the target
value is reached.
Note:
@ Various mechanisms in the machine act on com-
pensating the spring back of the workpiece so that
the target value is reached. The displayed value
achieved may therefore deviate from the target
value entered.
(Option) Industrial crimp calculator
This is only displayed, if the machine is configured
with this function and this function is activated in
the machine settings.
See "UNIFLEX Data Logging (UDL) and Industrial
Crimp Calculator (ICC)" in Section 4.