Load Data Record Using A Scanner (Option) - Danfoss Control C.2 Operator's Manual

6.3.5 Load data record using a scanner (option)

Scan the barcode using the scanner, or enter the barcode clear text
manually. The scanned barcode is interpreted as the name of a data
record.
By accepting the scanned code, the data record table is searched for
the appropriate name. If a data record with the same name is found,
the related settings are loaded and the relevant screen for starting
production is displayed. If the name is not found, an error message is
displayed.
Delete scanned data.
Accept scanned data and change over to the pro-
duction screen.
Return to previous screen without accepting the
scanned data.