Table of Contents
Advertisement
Only for HM 220 C and HM 225 C.
Switches from slow pressing (tortoise) to rapid
pressing (rabbit) and vice-versa.
Slow pressing (tortoise) = 100 % pressing force.
Quick pressing (rabbit) = 45 % pressing force.
The current data record automatically changes over
to the next data record (subsequent data record).
Delete subsequent data record from input field.
The tool automatically opens after the forming pro-
cess.
The tool does not automatically open after the form-
ing process.
The screen for approaching the change position for
crimping dies is opened.
Please refer to "Change crimping dies" in Section
5.
Save the displayed data under a name and add it to
the database.
Note:
Do not use any special characters for designation
to prevent errors.
If a scanner is connected (optional), the data record
may be activated via a barcode.
(Option) Check forming result. See "Check with cal-
liper" in Section 5.
•
Green display: automatic measuring after
forming is activated.
•
Red display: automatic measuring after form-
ing is deactivated.
Advertisement
Table of Contents
