Table of Contents
Advertisement
2
Safety instructions
2.1
Presentation of warning notes
DANGER!
WARNING!
CAUTION!
ATTENTION!
2.2
Safety instructions
2.1
Use in compliance with intended purpose
Warning notes in the Operation Manual warn against risks involved
with the handling of the machine. Risk levels are identified as follows:
The signal word HAZARD identifies an imminent hazard resulting in
serious injuries or death. This warning is supplemented by a triangu-
lar hazard symbol.
The signal word WARNING identifies a potentially hazardous situa-
tion, which might result in serious injuries or death. This warning is
supplemented by a triangular hazard symbol.
The signal word CAUTION identifies a potentially hazardous situa-
tion, which might result in light injuries. This warning is supplemented
by a triangular hazard symbol.
The signal word ATTENTION identifies a potentially hazardous situa-
tion, in which the product or property in the environment may be dam-
ages. This warning is supplemented by a hazard symbol or a excla-
mation mark.
This control unit is intended for industrial applications, only to be used
to control the supplied UNIFLEX machine.
Intended purposes include:
•
Operating temperature between 10°C and 45 °C;
•
Operation in a closed room.
Use of the machine in compliance with the intended purpose also in-
cludes compliance with the instructions in this Operation Manual.
Use not in compliance with intended purpose
Any other use is considered as not in compliance with the intended
purpose, in particular:
Advertisement
Table of Contents
